1968 400 block
1972 455 Crank turned down to 3" mains (welded thrust face)
1965 Tripower (Jets are to be determined)
M-21
1977 6X heads milled to 94cc
Ultradyne JBP Custom Grind 280/288 223/235 @ 0.050 .463/.485 110 CL ground 6 advanced (Install straight up)
1.5 Harland Sharp Roller Rockers
JBP Stainless Valves
JBP springs
JBP locks
Stock Retainers
Blocked off x-over with Aluminum (A few Chevy JE Pistons are good for something:)
Reconditioned stock rods
TRW forged pistons
Sealed Power Moly Rings
3:23 Posi Looking for a 3:55
Hooker Super Comp Headers with Ceramic Coating
3" exhaust
Walker Dynomax Mufflers
Dr. Gas Crossover
Mellings High Pressure Oil pump w/ 3/4" pickup
Cloyes Timing Chain
ARP main studs
SPS Rod Bolts
All rest ARP